The TV One A2-2000 Stereo Audio Switcher is a companion product for the C2 series Video Processors. It is slaved to and controlled directly from the Video Processor or it can be operated via one of the remote control units used to operate the C2 series product. Audio Follow Video (AFV) or Audio Breakaway functionality is fully supported. Additionally, the unit handles both high impedance unbalanced and low impedance balanced audio. It is styled to complement the appearance of the Video Processor and like the Video Processor, it can be operated in desktop or rack mount mode.
The A2-2000 connects to the C2 series Video Processor via a single interconnect cable and obtains its power from the Video Processor.
Adds Audio Follow Video or Audio Breakaway capability to either of the Universal Scalers
This separate unit is 1 RU high and connects to the Scaler with a 15-Pin interconnect cable
The microprocessor in the A2-2000 communicates with the microprocessor in the Universal Scaler
All commands originate in the control software of the Universal Scaler
The A2-2000 provides both Balanced and Unbalanced connections for its 10 Inputs, plus its Preview and Program Outputs.
1T-CT-612 and 1T-CT-613 constitute a system used to transmit deep color (12 bit) V1.3 HDMI or DVI-D signals at resolutions up to 1920×1200 and 1080p, plus digital, embedded, lossless audio over Cat.5e or Cat.6 cables. The TV ONE 1T-CT-611 Transmitter and 1T-CT-612 Receiver can achieve signal distribution distances of up to 45 meters (150 feet) for 1080p/8 bit signals and 15 meters (50 feet) for 1080p/12 bit signals. This distance can be doubled with the use of a 1T-CT-613 Repeater. For normal operation, two Cat.6 cables are required, one for the main signal and one for the HDCP/DDC signal. The 1T-CT-611 Transmitter and 1T-CT-612 Receiver feature the unique TV One-task locking power connectors to enhance overall system mechanical security. The 1T-CT-613 Repeater does not require a separate power supply.
The 1T-CT-611 CAT.6 HDMI Extender from TV One is the transmitter unit of a paired kit that is designed for sending HDMI signals with a resolution of up to 1900 x 1200 or 1080p over CAT 6 Ethernet cable. This unit accepts an HDMI signal, then converts it to an Ethernet signal and outputs it to the receiver. Use this solution in digital flat-panel display applications that require long cable runs, such as home theaters, cinemas, and retail displays, among many other possible uses.
It will support data throughput of up to 2.25Gbps and has a system range of 50 to 150′ depending upon the signal type. It is also compatible with DVI-D signals. Locking power connectors are also included to enhance the security of your setup.
Note! This unit must be paired with a receiver unit in order to achieve a complete solution.
HDMI over Ethernet Cable
This unit is part of a paired system designed to transport an HDMI signal over Ethernet cable.
The solution supports data throughput of up to 2.25Gbps.
The kit offers a range of 50 to 150′ depending upon the signal type.
Small Footprint -
This unit is small enough for desktop or rackmount placement.
Altinex DA1905GL 1-In 1-Out RGBHV Line Driver/Isolator
* 5-BNC RGBHV Input
* 6-BNC RGBSHV Buffered Output
* Compensates for cable runs up to 300ft (91m)
* GLI on-board
* Sync Combining/Sync Separating
* Ultra compact enclosure
* Includes: (1) power adapter
The Altinex DA1905GL is a multi-purpose RGBHV line driver, ground loop isolator, and sync processor. As a Line Driver, the DA1905GL offers a single ouput (6-BNC connectors for RGBSHV). It will also accept RGBS, RGsB, component video (Y, R-Y, B-Y), S-video, and composite video signals using the appropriate channels. Used to compensate for loss over long runs of coaxial cable, the DA1905GL may be installed alone or with an interface, or iwth additional DA1905GL units, depending on system requirements. Typically, the DA1905GL might be used at the end of a cable run with an interface at the head-end of the run.
The DA1905GL is engineered for custom signal alignment, enabling it to be modified to handle cable runs of 300ft (91m) or more. The DA1905GL is compact and streamlined, making it easy to fit virtually anywhere in a system.
Ultimately, the Altinex DA1905GL acts as a sync processor, allowing you to combine horizontal and vertical sync into composite sync or splits composite sync into separate horizontal and vertical sync.
Gas-spring technology provides smooth open and close
Craftsman-milled edges create ultra-flat surface when closed
Ships with 6ft. pre-terminated cables for quick installations Customizable connectors and finish
The Altinex PNP402 is a package of parts that covers the basic needs of many Pop ’ N Plug users. When this item is ordered, it ships as a completely assembled product made up of: one PNP400 and two Sectional Plates with input labels engraved on both plates.
Each plate includes the following connectors: two standard U.S. power receptacles, Computer Video (15pin HD), COM Port/RS-232 (9pin D), Composite Video (RCA), S-video (4pin mini-Din), Audio (2-RCAs), Computer Audio (3.5mm Stereo Mini), Modem (RJ11), and Network (RJ45) input connectors. All connectors have 6ft. cables attached that feed through to the bottom of the unit. The connectors and their labels may be customized for a fee.
Receiver: RGBHV+Stereo/SPDIF. Up to 300M (1,000′). Built in Cat.5 Repeater
The TV One 1T-CT-456 is a comprehensive system for the transmission of RGBHV video at resolutions up to 1920×1200 and 1080p, plus digital or analog audio signals over Cat.5/5E or Cat.6 cable at great distances. The mix and match approach to the product line enables the user to choose the most cost efficient units to perform a specific task. Rackmount options are available for all models for ease of systems integration. All products use the unique TV One-task locking power connectors to enhance overall system security.
Receivers Five Receiver models continue the theme of flexibility, allowing the selection of the appropriate unit to provide distances of up to either 150 meter (500 feet) or 300 meter (1,000 feet). Choose models with or without audio as the application dictates. The long range models have built-in RGB Skew Compensation adjustments. The 1T-CT-456 has a built-in UTP Repeater that allows another receiver to be cascaded up to an additional 300 meters (1,000’). Select the appropriate receiver using the reference charts that follow.
The 1T-CT-456 CAT.5 Extender from TV One is a device in a modular system designed for transmitting varied media over extended distances using CAT 5/5E/6 Ethernet cable. This unit is a receiver designed to manage RGBHV signals and analog stereo and S/PDIF audio. It can be paired with a number of transmitters with different features in the system to create a custom setup that meets your exact needs.
It has a system range of up to 500′ and supports a maximum resolution of 1920 x 1200 or 1080p. Gain and equalization adjustments are also available to fine tune performance. This model also offers a buil-in RGB skew compensation feature and UTP repeater output. Locking power connectors are included to enhance the security of your setup.
Note! This unit must be paired with a transmitter unit in order to achieve a complete solution.
Signal Transmission over Ethernet Cable -
This unit is part of a paired system designed to transport your signals over Ethernet cable for work in setups that require extended cable runs.
Small Footprint -
It is small enough for desktop or rackmount placement.