Monthly Archives: September 2011

Knox Cham64i 32×32 BAM-VT-FPC

September 30, 2011
By

Knox Cham64i 32×32 BAM-VT/FPC

Knox Video Technologies C64IBMVT3232 VT (Volume and Tone) Control Package for 32×32 Modular Balanced Mono Audio Card and Chameleon 64i Modular Audio-Video Routing Switcher

The C64IBMVT3232 VT (Volume and Tone) Control Package for 32×32 Modular Balanced Mono Audio Card in the Chameleon 64i Modular Audio-Video Routing Switcher from Knox Video is a special package designed to provide advanced functionality with your audio card in the Chameleon 64i Routing Switcher. This package is designed specifically to work with the 32×32 Modular Balanced Mono Audio Card.

By adding this control to your card, you can manage your audio feeds with more precision in a number of different areas. Audio control features include loudness and mute, input trim, and variable-audio output levels. Output volume and balance controls can be preset or adjusted in 1.25db increments. Bass and treble control features offer full boost and cut capability. A loudness function, based on Fletcher Munson curves, may be toggled on and off. Additionally, a timed-audio fade function offers a full-fade range from 1/10 of a second to 10 full seconds.

Default configuration and control of this package and all matrices is primarily managed via the Chameleon’s front panel or RS232. An optional Windows-based control package from Knox Video also offers control with the additional benefit of a volume-and-tone-control graphic user interface.

Note! This product is designed for use with the Chameleon 64i Routing Switcher and an appropriate audio card. This package will not work without the switcher and audio card.

Precision Management -
This unit allows you to control the audio parameters associated with your audio card more precisely.
Advanced Audio Control Features -
The VT package control options include loudness and mute, input trim, variable-audio output levels, balance, bass and treble, loudness, and timed-audio fade functions.
Control -
Default configuration and control of this unit and all matrices is primarily managed via the Chameleon’s front panel or RS232, although an optional Windows-based control package with advanced functionality is also available.

Knox Video Technologies Cham64i 32×32 BAM-VT/FPC

Additional Knox Video products

AV Toolbox AVT-4214 VGA Distribution Amplifier

September 28, 2011
By

AV Toolbox AVT-4214 VGA Distribution Amplifier

- 1×4 Computer Signal Splitter -

The AV Toolbox AVT-4214 VGA Distribution Amplifier provides four identical computer outputs from a single input. The input signal is amplified and distributed via its internal circuitry to insure that all four outputs are of identical quality to the input signal.  Now it’s easy and inexpensive to feed four computer monitors over 150 feet away from the same computer.  The unit’s 150MHz bandwidth makes it possible to handle resolutions up to 1600×1200 without signal degradation

AV Toolbox AVT-4214 VGA Distribution Amplifier

Features

  • 1 Computer Input via HD15 Male connector
  • 4 Computer Outputs via HD15 Female connectors
  • Outputs good for over 150′ without signal loss
  • Handles VGA, SVGA, XGA, and higher
  • Up to 1600×1200 Resolution
  • Bandwidth: 150MHz
  • Size: 1.75″ High x 6.2″ Wide x 4.5″ Deep (45mm x 160mm x 115mm)
  • Weight: 1 lb (450 g)
  • Plastic Case
  • PC Input Cable Included
  • 115VAC to 9VDC @ 500mA Power Adapter Included
  • One-Year Limited Warranty

Additional AV Toolbox products

Adtec H2Q Dual Channel MPEG2 Encoder

September 26, 2011
By

Adtec H2Q

Dual Channel High and Standard Definition MPEG 2 encoder with built-in QAM modulator and agile RF up-converter. Auto detects two channels of high definition video and PCM or Compressed Dolby audio via HDMI 1.3 (NO HDCP support). Encodes video to HD MPEG 2 Transport Stream, passes Dolby audio (AC3 or 5.1) or encodes PCM to Dolby AC3 per ATSC A52 or MPEG 1 Layer 2 audio, creates MPTS, modulates to QAM Annex A or B, and outputs RF/IF, ASI and GigE concurrently. Supports ATSC A69 PSIP and DVB-SI ETSI EN 300 468 service information (both PSIP and SI are static with optional dynamic PSIP/SI using DTVGuide), closed captioning per CEA 608 via composite video input with up-conversion to CEA 708 Digital captions internally and EAS. Provided two DC 5 Volt power jacks for external Component or SDI to HDMI converters.

Adtec H2Q Features

  • High and standard definition dual encoding
  • Automatic video detection
  • QAM modulation and RF up-conversion
  • Flexible configuration & control

Additional Adtec products

Eiki 610 334 3747 replacement filter cartridge

September 23, 2011
By

The Eiki 610 334 3747 is a replacement filter cartridge for the LC-X80.

610 334 3747

LC-X80 projector lamp

Altinex TNP502 Tilt n Plug

September 21, 2011
By

Altinex TNP502

* High density connecivity
* Gas-spring technlogy provides smooth open and close
* Craftsman-milled edges create ultra-flat surface when closed
* Ships with 6ft pre-terminated cables for quick installations

The Altinex TNP502 is a “package” of parts that covers the basic needs of many Tilt ‘N Plug users. When this item is ordered, it ships as a completely assembled product made up of: one TNP500 and one SP3500SC Sectional Plate, with input labels already engraved on the plate.

The plate includes the following connectors: two standard U.S. power receptacles, computer video (15-pin HD), COM Port/RS-232 (DB9), composite video (RCA), S-video (4pin Mini-DIN), audio (2-RCAs), computer audio (3.5mm Stereo Mini), modem (RJ-11), and network (RJ-45) input connectors. All signal connectors have 6ft (2m) cables attached that feed through to the bottom of the unit. The connectors and their labels may be customized for a fee. The unit can also be customized with different connections and colors. To do so, click the link shown above.

The network signals are passed through the unit with connection to the network system being made under the table. No signal processing or buffering takes place.

Altinex TNP502

Features

  • * Mounts into tabletop
  • * Offers space for 6 Sectional Plates on one side
  • * Variety of Sectional Plate configurations available
  • * Opens/closes by pressing on top panel
  • * All signals pass-through to the underside of the table
  • * Perfect for boardrooms and conference rooms
  • Designed for installation into a table in a presentation or boardroom, the Tilt `N Plug™ Configurable Tabletop Interconnect Box provides access to multi-media input connections when needed, and hides them when not needed. This unit can be configured with a wide variety of data or A/V connectors before shipment from ALTINEX.
  • Using a tilting angular construction with pneumatic lift assist and a mechanical latching mechanism, the TNP500 can either “tilt up” into a raised position to provide access to input plates, or it can be lowered flush into the table when not in use. The unit is opened and closed by pressing down on the top panel.
  • Note that, while the TNP500 is similar in many ways to its predecessor (TNP100), it actually performs the lifting function internally, and does not require the user to lift the faceplate up. Only light pressure is required to unlatch the top to open it, and slightly more pressure to push the lid down and close the unit.
  • The TNP500 provides six Sectional Plate slots on the exposed faceplate, servicing one side of a table. Signals are passed through the unit to the underside of the table. A variety of sectional plate connector configurations are available to populate the slots – see Sectional Plate Accessories for a list of available options. All Sectional Plates must be ordered separately.
Additional Altinex products
Additional Tilt n Plugs