Knox

Knox 8x8HB Matrix Switcher

June 18, 2012
By

Knox 8x8HB Matrix Switcher

The RS series switchers accept up to sixteen composite, Y/C, or HD component video sources, sixteen balanced or unbalanced stereo audio sources, and connect any one of the input sources to one or more of up to sixteen outputs. Control of the switchers is accomplished via RS232 or the intuitive front panel control. The switchers are housed in an ultra-thin chassis, greatly reducing the depth needed and thus easing cable management challenges.

The Knox RS8x8HB is a high performance audio/video routing switcher in a thin profile 3-unit rackmount chassis. It accepts and routes almost any 1 volt Composite, Y/C, or component video input including off-the-air and non-timebase corrected signals. The RS8x8HB accepts and routes mono or stereo unbalanced audio up to 2 volts p-p or balanced stereo audio from 0 to +18 dbm. Video and audio inputs can be routed independently; they need not have the same destinations. Easy manual operation by front panel push buttons, or send routing commands from a terminal or computer to RS232 interface. The simple ASCII protocol is compatible with most third-party controllers.
Optional Knox control and scheduling software are also available. Battery backed-up memory stores up to eight different studio
patterns. Internal timer allows timed sequence of patterns for surveillance applications.

Knox RS4x4HB RGB Matrix Switcher

March 20, 2012
By

Knox Video RS4x4HB RGB

The Knox Video RS4x4HB RGB is a 4×4 matrix switcher with component video and unbalanced stereo audio, dual chassis (part of Knox Video RS Series component routing switchers).

The RS series switchers accept up to sixteen composite, Y/C, or HD component video sources, sixteen balanced or unbalanced stereo audio sources, and connect any one of the input sources to one or more of up to sixteen outputs. Control of the switchers is accomplished via RS232 or the intuitive front panel control. The switchers are housed in an ultra-thin chassis, greatly reducing the depth needed and thus easing cable management challenges.

The RS Series are high performance audio/video routing switchers in a thin profile rack mount chassis. They accept and route almost any 1 volt Composite, Y/C, or Component video input signals. The RS Series accepts and routes mono or stereo unbalanced audio up to 2 volts p-p or balanced stereo audio from 0 to +18 dbm. Video and audio inputs can be routed independently; they need not have the same destinations. Easy manual operation by front panel push buttons, or simple RS232 commands from a terminal or third party controller. Knox control and scheduling software is also available. Internal timer allows timed sequence of patterns for surveillance applications.

• Up to 16 Inputs and Outputs
• Breakaway Stereo Audio
• Battery Backup
• DC to 200 MHZ
• Manual and RS232 Control
• Vertical Interval Switching
• Composite, Y/C, and Component Versions Available

Written on every Knox switcher is detailed operation instructions enabling quick set-up for even the novice user.

Additional switchers

Additional Knox Video products

Knox MediaFlex 16 RGB-VGA Presentation Switcher

March 14, 2012
By
Presentation Switcher

The Knox MediaFlex16RGB-VGA component video, unbalanced stereo & VGA presentation switcher from Knox Video is a high-performance switcher designed to accept up to 16 feeds and connect any one of these inputs to one of the 16 available outputs. This series of switchers is available in numerous models to support a wide array of audio and video formats.

Choose the model that meets your specific needs. This switcher is well suited for corporate presentations, educational programs, residential media centers, sports bars, and restaurants, among many other possible uses.

Viscount Video is your source for the Knox MediaFlex 16 RGBVGA

Features

  • The MediaFlex16RGB-VGA is designed specifically to support Component video and unbalanced stereo with 16×16 inputs and outputs. It also includes an independent 16×16 VGA matrix in the same chassis to route high-resolution sources. The VGA matrix allows you to send signals from devices such as graphics generators and laptop PCs to several downstream devices such as data monitors and LCD projectors without a loss of resolution.
  • This model includes a VT (Volume & Tone) Control Package that allows you to manage your audio feeds with more precision in a number of different areas. Audio controls include volume, bass, treble, balance, input trim, mute, loudness, and timed fader. Each output can be adjusted individually for optimal quality. Alternatively, a practical salvo command allows you to adjust all zones at once.
  • Front-panel control options include a dual LCD display, RS-232 port, and contact closures. This unit is fully compatible with Creston, AMX, and Leightronix event & touch-screen controllers. The switcher is housed in a compact, 4U, rackmount chassis.
  • 16×16 Component Video & Unbalanced Stereo Audio Switcher – This unit is designed specifically to support Component video and unbalanced stereo with 16×16 inputs and outputs.
  • 16×16 VGA Switcher – This switcher includes an independent 16×16 VGA matrix in the same chassis to route high-resolution sources.
  • Volume & Tone Control – This switcher includes a VT (Volume & Tone) Control Package that allows you to manage your audio feeds with more precision in a number of different areas: volume, bass, treble, balance, input trim, mute, loudness, and timed fader.
  • High-Performance Applications – This switcher is well suited for corporate presentations, educational programs, residential media centers, sports bars, and restaurants, among many other possible uses.
  • Controls – Front-panel control options include a dual LCD display, RS-232 port, and contact closures.
  • Third-Party Controllers – This unit is fully compatible with Creston, AMX, and Leightronix event & touch-screen controllers.
  • Rack Friendly – The switcher is housed in a compact, 4U, rackmount chassis.

Additional Knox products

Additional switchers

Knox Video DC-50 Cross Converter

November 2, 2011
By

Knox Video Technologies DC-50

Cross Converter – Computer video to HD video and vice versa

The Knox DC-50 Cross Converter from Knox Video is designed to perform video cross conversion. It can translate computer video signals to HD video and HD video to computer video. This unit’s small footprint makes it equally well suited for use in desktop or rackmount setups.

Computer to HD/HD to Computer Cross Conversion -
This unit is designed to perform computer video to HD video conversion and vice versa.
Desktop or Rackmount -
Because of its small size this unit can be used in a desktop or rackmount setup.

Knox Video Technologies DC-50

Additional Knox Video products

Knox Mediaflex16 Y/C UBAS presentation switcher

October 13, 2011
By

Knox Video Technologies MediaFlex16Y/C UBAS


S-Video & Unbalanced Stereo Presentation Switcher – 16X16 S-Video with Unbalanced Stereo Audio,Volume and Tone Control

The Knox MediaFlex16Y/C S-Video & Unbalanced Stereo Presentation Switcher from Knox Video is a high-performance switcher designed to accept up to 16 feeds and connect any one of these inputs to the 16 available outputs. This series of switchers is available in numerous models to support a wide array of audio and video formats. Choose the model that meets your specific needs. This switcher is well suited for corporate presentations, educational programs, residential media centers, sports bars, and restaurants, among many other possible uses.

The MediaFlex16Y/C is designed specifically to support S-Video and unbalanced stereo with 16×16 inputs and outputs. It also includes a VT (Volume & Tone) Control Package that allows you to manage your audio feeds with more precision in a number of different areas. Audio controls include volume, bass, treble, balance, input trim, mute, loudness, and timed fader. Each output can be adjusted individually for optimal quality. Alternatively, a practical salvo command allows you to adjust all zones at once.

Front-panel control options include a dual LCD display, RS-232 port, and contact closures. This unit is fully compatible with Creston, AMX, and Leightronix event & touch-screen controllers. The switcher is housed in a compact, 4U, rackmount chassis.

16×16 S-Video & Unbalanced Stereo Audio Switcher -
This unit is designed specifically to support S-Video and unbalanced stereo with 16×16 inputs and outputs.

High-Performance Applications -
This switcher is well suited for corporate presentations, educational programs, residential media centers, sports bars, and restaurants, among many other possible uses.

Volume & Tone Control -
This switcher includes a VT (Volume & Tone) Control Package that allows you to manage your audio feeds with more precision in a number of different areas: volume, bass, treble, balance, input trim, mute, loudness, and timed fader.

Controls -
Front-panel control options include a dual LCD display, RS-232 port, and contact closures.

Third-Party Controllers -
This unit is fully compatible with Creston, AMX, and Leightronix event & touch-screen controllers.

Rack Friendly -
The switcher is housed in a compact, 4U, rackmount chassis.

Additional Knox products