Knox Video Mediaflex 16

October 14, 2010
By

Knox MediaFlex 16 presentation switcher

The Knox MediaFlex16 presentation switcher accepts up to sixteen composite, Y/C, component or analog HDTV video sources, sixteen unbalanced or balanced stereo audio sources, and connects any one of the input sources to one or more of the sixteen zones with volume and tone control (VT). An independent 8×8 VGA matrix (DB15HD) is available in the same chassis to route high-resolution sources such as graphics generators or laptop pc’s to several downstream devices such as data monitors and LCD projectors without loss of resolution.

* Video – Composite, Y/C ,Component(30MHz)
* Frequency Response 1v NTSC or Y/C (S-VHS orHi-8) or analog HDTV (YUV OR RGB) DC to 30MHz @ 1v<3dB down at30MHz
* Crosstalk less than -70 dBat 5 MHz
* Input Impedance 75 ohms
* Output Impedance 75 ohms
* Gain unity +/-0.2 dB
* Connectors BNC
* Video – RGBHV (200MHz)
* Levels Composite, Y/C,YUV/RGB, RGBS, RGBHV
* Frequency response DCto 200MHz: @ 1V <-6db
* Video Input up to 1.0v p-pRGB@75 ohms
* Input Impedance 75 ohm
* Output Impedance 75 ohm
* Sync Impedance 510 ohms
* Sync Range H up to 250KHz, Vup to 250Hz
* Crosstalk all hostile: typ<-70db @5MHz, <-55db @2OMHz
* Connectors BNC
* Video- VGA (200MHz)
* Levels VGA,SVGA, XGA, UXGA
* Frequency response DCto 200MHz: @ 1V <-6db
* Input Impedance 75 ohm
* Output Impedance 75 ohm
* Crosstalk all hostile: typ <-70db @5MHz, <-55db @2OMHz
* Connectors DB15HD
* Balanced Audio
* Levels 0,4, or 16dB clipping at 18dB
* Frequency Response 20Hz through50KHz +/- 1/4dB
* Hum and Noise less than -90dB
* Crosstalk less than -90dB@20KHz
* Input Impedance Bridging or 600 Ohm Termination
* Output Impedance 100ohms
* Connectors Removable, screw terminal
* Unbalanced Audio
* Frequency Response 2V UnbalancedStereo Audio
* 20Hz through 30KHz
* Crosstalk less than -85 dBat 1kHz
* Input Impedance 15k ohms, DC coupled
* Output Impedance 100ohms, DC coupled
* Gain (all controls flat): unity +/- 0.2 dB
* Connectors RCA
* Audio Functions
* Front Panel Control or Serial PortUtilizing Knox SAS (Simple ASCII Strings) OutputVolume
* InputTrim
* BassBoost/Cut
* TrebleBoost/Cut
* Left/RightBalance
* Mute
* Loudness
* TimedFader
* Power
* 100-120 or 200-240 VAC, 47 to63 Hz, 50 Watts maximum
* Dimensions
* 4U rackmount chassis
* 7” high x 19”wide x 10” deep
* Shipping Weight 12 lbs.

Integrated Volume and Tone Control
High Bandwidth
Optional 8×8 VGA Matrix
IR Control

Features

* The Knox MEDIAFLEX16 presentation switcher accepts up to sixteen composite, Y/C, component or analog HDTV video sources, sixteen unbalanced or balanced stereo audio sources, and connects any one of the input sources to one or more of the sixteen zones with volume and tone control (VT). An independent 8×8 VGA matrix (DB15HD) is available in the same chassis to route high-resolution sources such as graphics generators or laptop pc’s to several downstream devices such as data monitors and LCD projectors without loss of resolution. Modular From 16×16 Composite Video To 16×16 RGBHV With Optional 8×8 VGA Matrix 30-200MHz Video Bandwidth (200MHz RGBHV/ VGA) SAS Instruction Set (Simple Ascii Strings) 16×16 Unbalanced or Balanced Stereo Audio With Volume & Tone Control Dual LCD Displays Available With Independent 200MHz 8×8 VGA Matrix 5-year warranty Applications: Corporate Presentation Education Residential Sports Bars Restaurants Video: These presentation routers provide full-matrix switching of multiple levels of video. Active, fully buffered, ultra-high bandwidth crosspoint modules allow a variety of signals including composite video, S-video, component and VGA to be switched simultaneously without crosstalk. Audio: Audio controls include volume, bass, treble, balance, input trim and mute. Adjust each output individually for optimal audio quality in any environment. Salvo commands allow adjusting all zones at once.Control: Front panel control with dual LCD display, RS-232 port and contact closures. Fully compatible with Creston, AMX and Leightronix event and touch screen controllers. Dimensions: 4U Rackmount Chassis – 19” W x 7”H x10”D

Additional Knox products.

Additional switchers.

Leave a Reply